I. PURPOSE :
To provide a procedure for the Operation of Ultrasonic Bath.
II. SCOPE :
This procedure is applicable for the Ultra sonic bath being used for the analytical purposes in the Quality Control department of
III. RESPONSIBILITY :
It is the responsibility of all the personnel involved in the analysis using of the equipment.
IV. DOCUMENT REFERENCE :
SOPs : None
Forms : None
V. OPERATION :
1.0 PRELIMINARY CHECK :
1.1 Check that the equipment and the inside water is clean, if not, clean with a soft cloth duster and change the water.
2.0 BASIC OPERATION :
2.1. Switch on the instrument using the RED switch which is on the front of the instrument.
2.2. Set the desired time for sonication from 0.00 minutes to 9.59 minutes by using the upward arrow keys on the micro timer panel.
2.3. Start/Stop the sonication by pressing the RED colour round toggle key.
2.4. Pour De mineralised water in the ultrasonic bath.
2.5. Drain the water in the ultrasonic bath daily or when ever any material is spilled or when ever the colour of water changes.
2.6. Ensure the water level at the time of sonication to avoid the floating of the bottles used.
Ultrasonic bath, micro timer panel, sonication, soft cloth
