1.0 PURPOSE:
To describe a standard operating procedure (SOP) for area cleaning.
2.0 SCOPE:
The SOP describes in detail the method of area cleaning.
3.0 RESPONSIBILITY:
The responsibility of getting the area cleaned as per the SOP lies with the staff of the rank not lower than operator of the production department.
The responsibility of preparing, reviewing and approving the SOP lies with the Officer (Production), Head of Production and Head of QAD respectively.
4.0 METHOD:
4.1 DAILY CLEANING PROGRAMME:
4.1.1 Remove cobwebs if any with 10 feet broom stick (use ladderwhenever required).
4.1.2 Sweep the floor with 3 feet broom.
4.1.3 Clean Glasses and window panes free from dust.
4.1.4 Wet mop the floor with 0.5 to 1.0% Nirma soap solution.
4.1.5 Frequency: Twice in a day.
4.2 QUARTERLY CLEANING PROGRAMME:
4.2.1 Clean motors, compressors, switchboards and other electrical points with compressed air after putting off the power supply.
4.2.2 Clean ceiling, walls and floor with 3 feet broom (use 10 feet broom stick and ladder whenever required).
4.2.3 Clean floor with wet mopper.
4.2.4 Mop floor with dry cloth
5.0 RECORDING:
The area cleaning operation will be recorded by the supervisor in the area cleaning record as shown in annexure-I.
Area cleaning, production
