To describe a standard operating procedure (SOP) for identifying, storing and disposing of waste materials.
1.0 PURPOSE:
To describe a standard operating procedure (SOP) for identifying, storing and disposing of waste materials.
2.0 SCOPE:
The SOP describes in detail the method of identifying, storing and disposing of waste materials.
3.0 RESPONSIBILITY:
The responsibility of identifying, storing and disposing of waste materials as per the SOP lies with the staff of the rank not lower than operator of the production department.
The responsibility of preparing, reviewing and approving the SOP lies with the Officer (Production), Head of Production and Head of QAD respectively.
4.0 METHOD:
4.1 The boiler ash, spent carbon and solid residue from production will be transported and stored in the designated cubicles.
4.2. The waste bags (Poly), MS drums and fibre drums will be transported to the designated cubicles.
4.3. The boiler ash, spent carbon, bags, MS drums and fibre drums will be sold as per the accumulation of stock.
4.4. The solid residues and unsalvaged non-conforming products from production batches will be burnt in incinerator located in one of our units at pashamylaram.
5.0 RECORDING:
The gate passes will be maintained by the security personnel.
Production, waste materials, identification
